DESIGN DETAILS
Tank(s): Meets ASME Sec VIII, Div 1
Volume: 5,000-gallon Available in 2, 3 or 4 compartments
Shell, F&D Heads: Material 1/4-inch SA-36
Outside Dimensions: 60-inch stiffening rings used
Manways: Hawk FRP, Wilco or Clay and Bailey manways available
Vents: DOT approved vents for each compartment
Recirculation Manifold: 3 inch remote control butterfly valves
Discharge Manifold: 4-1/2 inch polyethelene line connecting
all compartments at 5 inch tees
Discharge valves from unit manifold: 5 inch manual valves
Discharge valves from individual tank compartments: 5 inch air actuated
butterfly valves at exit for each compartment
Discharge and Recirculation Manifold: All steel components are lined
Discharge and Recirculation Manifold Ends: 5 inch or 4 inch male unions
per customer specification)
Recirculation line along top: 3 inch polyethelene hose (standard)
or optional 3 inch steel pipe
Catch Basin: Located at rear of unit. Used to collect any fluids from hose
rack and pipe ends
DOT Overturn Protection: Tombstones

Trailer: DOT 412MS
Width: 96 inch
Overall length: 41 ft, 5 inch (497 inch)
Length-king pin to rear bumper: 38 ft, 9 inch (465 inch)
Suspension: 2 axles, 25-kip Neway Air Ride with ABS
Tires: Eight 12R20 radial tires on unimount wheels
Landing gear: Holland trailer landing gear with self leveling foot
King pin: 2 inch or 3 inch welded or bolted king pin assembly
Lights: 2 work lights at rear
Fenders: 1/8 inch steel, diamond pattern
Stairway/Ladder: located at rear, ladder fastens under stairs
Walkway: full length walkway with fiberglass grating, handrails
and OSHA approved safety gate
Hose Tray: 28-ft fiberglass hose tray with grating and drain
Toolbox: 18 x 18 x 36 inch
Catch Basin: 5 gallon capacity, located at rear
Paint: shotblasted with epoxy primer coat and polyurethane top coat
(customer choice of colors)
Internal Liner: FRP, Tnemec 120, Tnemec 390, rubber or customer specified
Placards: DOT placards as required
Controls: Air controls for discharge and recirculation lines, including emergency
kill switch located on front driver’s side on trailer

DESIGN DETAILS
Tank(s): Meets ASME Sec VIII, Div 1
Volume: 5,000-gallon Available in 2, 3 or 4 compartments
Shell and Heads: Material 5/8 in. FRP
Manways: Hawk FRP or Wilco
Vents: DOT approved vents for each compartment
Recirculation Manifold: 3 inch remote control butterfly valves
Discharge Manifold: 4 inch, with acid resistant hose
Discharge valves from unit manifold:
4 inch, manual valves
Discharge valves from individual tank compartments: 4 inch, air actuated butterfly valves at exit for each compartment
Discharge and Recirculation Manifold:
All steel components are lined
Discharge and Recirculation Manifold Ends:
4 inch male unions per customer specification
Recirculation line along top: 3 inch
Catch Basin: Located at rear of unit. Used to collect any fluids from hose rack and pipe ends
DOT Overturn Protection: Tombstones
Trailer: DOT 412MS
Width: 96 inch
Length-king pin to rear bumper:
40 ft, 2 inch
Suspension: 2 axles, 25-kip Neway
Air Ride with ABS
Tires: Eight 11R 22.5 radial tires on
unimount wheels
Landing gear: Holland trailer landing gear with self leveling foot
King pin: 2 inch or 3 inch welded or bolted king pin assembly
 

Lights: 2 work lights at rear
Fenders: 1/8 inch steel or FRP available
Ladder: located on roadside
Walkway: walkway with fiberglass grating, handrails and OSHA approved safety gate
Hose Tray: 28-ft fiberglass hose tray with grating and drain
Catch Basin: 5 gallon capacity, located at rear
Paint: epoxy primer coat and polyurethane top coat (customer choice of colors)
Placards: DOT placards as required
Controls: Air controls for discharge and recirculation lines, including emergency
kill switch located on front driver’s side
on trailer